Manual of the Aarenet VoIP Switch Support Tools

Note	The features and/or parameters listed in this article may not be available from your telephone service provider.

Home Support

Download PDF

Introduction

The VoIP Switch Administrators, Operators, Supporters find here information about the Aarenet VoIP Switch "On Board" tools for analyzing and supporting general VoIP Switch issues and customer problems:

• The ConfigCenter "Support Log" displays the VoIP Switch internal activities
• The ConfigCenter "Traces" displays the signaling between the VoIP Switch an external devices
• The ConfigCenter "Call Data" lists the CDR of all incoming or outgoing connections or connection attempts. The "Call Data" provide shortcuts to SIP, SDP trace and RTP statistic information of a single call.
• The ConfigCenter "Address Registration" displays if a SIP device or MGCP MTA has registered a telephone number
• The ConfigCenter "System Components" displays the state and activity of the VoIP Switch components
• The ConfigCenter "Channels" displays the state of connections
• The ConfigCenter "System Utilization" displays a statistical overview of the VoIP Switch resource utilization

→ Top

VoIP Switch ConfigCenter Support Tools

→ Top

The ConfigCenter Support Log

The "Support Log" provides the supporter with information from the internal processes of the ServiceCenter:

• Registration
• Connection setup, release and exceptions
• Call Routing
• Used Ruleset
• Emergency calls
• etc

The "Support Log" provides filters for:

• Time based selection: From – Until, From – Duration
• Text filter
• Registration events
• Call events
• etc.

The "Support Log" has a limited history. The history may last from a few hours up to some days. The length of the history may be different from VoIP switch to VoIP switch and depends on the length of log files and amount of logging events.

Note	The "Support Log" is tenant sensitive. This means a supporter of tenant A is not able to see events of tenant B!

→ Top

Navigate to the "Support Log"

ConfigCenter:

Menu "Support"

Menu "Support Log"

→ Top

Get a "Support Log"

Dialog: "Support Log":

When the dialog "Support Log" opens it contains by default in "From" the actual date/time (-5min) and in "Duration" a duration of 5min:

1. Click the Button [ Download ]
2. Via HTTP an ASCII formatted file with the last 5 minutes will be downloaded

Retrieving a "Support Log" in the past:

1. Insert the in "From" the desired start date/time
2. Insert in "Duration" the needed length
3. Press on the PC keyboard the 'Enter' key : The "Until" date/time will be computed
4. Click the Button [ Download ]

or

1. Insert the in "From" the desired start date/time
2. Insert the in "Until" the desired stop date/time
3. Press on the PC keyboard the 'Enter' key: The "Duration" will be computed
4. Click the Button [ Download ]

Best Practice

Get the events of a connection in the past: Search the Call ID of the connection in the "Call Data" Use the Call ID in the "Text" filter of the Support Log dialog Make sure that the connection date/time match "From"- "Until" Download the Support Log Get the events of a just finished connection: Set the "Duration" to 5min (or shorter) Download the Support Log Search for the connection

→ Top

Interpretation of a "Support Log"

The interpretation of a "Support Log" is quite easy and straight forward. With a little experience one will be soon familiar with the interpretation.

Interpretation and example of a call setup and release:

→ Top

ConfigCenter Trace

The "Trace" provides the supporter with information from the message traffic between the VoIP switch and external VoIP devices, such as PSTN gateway, SIP CPE, SIP or MGCP telephones.

The "Trace" contains:

• Session Initiation Protocol SIP registration and connection signaling messages
• Media Gateway Control Protocol MGCP audit and endpoint control messages
• Session Description Protocol SDP streaming media initialization parameters

The "Trace" provides filters for:

• Time based selection: From – Until, From – Duration
• Text filter

The "Trace" has a limited history. The history may last from a few hours up to some days. The length of the history may be different from VoIP switch to VoIP switch and depends on the length of log files and amount of logging events.

The interpretation of a "Trace" (PCAP formatted file) has to be done in an external application like Wireshark network protocol analyzer. Wireshark offers deep and rich VoIP analysis .

Note	The "Trace" is not tenant sensitive. This means a supporter of tenant A is able to see signaling messages of tenant B! Due to this open display of information it may be possible that the "Trace" is not available for the supporters and operators on a multi tenant VoIP Switch.

→ Top

Navigate to the "Trace"

ConfigCenter:

Menu "Support"

Menu "Trace"

→ Top

Get a "Trace"

Dialog: "Trace":

When the dialog "Trace" opens it contains by default in "From" the actual date/time (-5min) and in "Duration" a duration of 5min:

1. Click the Button [ Download ]
2. Via HTTP an PCAP formatted file with the last 5 minutes will be downloaded

Retrieving a "Trace" in the past:

1. Insert the in "From" the desired start date/time
2. Insert in "Duration" the needed length
3. Press on the PC keyboard the 'Enter' key: The "Until" date/time will be computed
4. Click the Button [ Download ]

or

1. Insert the in "From" the desired start date/time
2. Insert the in "Until" the desired stop date/time
3. Press on the PC keyboard the 'Enter' key: The "Duration" will be computed
4. Click the Button [ Download ]

Best Practice

Get the events of a connection in the past: Search the connection in the "Call Data" Click the Button [ Trace ] Get the events of a just finished connection: Set the "Duration" to 5min (or shorter) Download the Trace Search for the connection

→ Top

Interpretation of a "Trace"

The interpretation of a "Trace" needs experience!

For more information:

• See also SIP Knowhow
• Get a Wireshark training

Example of a Wireshark call capture, SIP setup and release:

Example of a Wireshark call list:

Navigate in Wireshark:

Menu "Statistics"

Menu "VoIP Calls"

Wireshark dialog where all calls are listed of the actual trace:

Example of a Wireshark call flow:

Navigate in Wireshark:

Menu "Statistics"

Menu "VoIP Calls"

Select the call of interest

Click Button [ Graph ]

Wireshark dialog where the message flow is shown of the selected call:

→ Top

The ConfigCenter Call Data

The "Call Data" lists the CDR of all incoming or outgoing connections or connection attempts. Extended filters enable the supporter to search for specific calls.

The "Call Data" has a limited history. The length of the history may be different from VoIP switch to VoIP switch and depends on the CDR storage length in the date base.

Note	The "Call Data" is tenant sensitive. This means a supporter/operator of tenant A is not able to see events of tenant B!

→ Top

Navigate to the "Call Data"

ConfigCenter:

Menu "Rating"

Menu "Call Data"

→ Top

Get a "Call Data"

Dialog: "Call Data":

Dialog: "Call Data"

→ Top

The ConfigCenter Address Registration

The ConfigCenter "Address Registration" displays if a SIP device or MGCP MTA has registered the telephone number. The supporter finds the following information of the registering devices:

• Type of registration, SIP, notifications, presence, etc
• IP address
• SIP user agent
• Registration time left.

Registrations can be de-registrated on the VoIP Switch by force.

Hint:
The device cannot be informed that it was de-registerd on the VoIP Switch. That means you have to wait until it re-registers automatically or force the device manually to re-register.

→ Top

Navigate to "Registrations"

ConfigCenter:

Menu "Addresses"

or

Menu "Accounts"

Click on the line of the desired account

Click on the right arrow at "Addresses"

For details:

Click on the line of the desired address

Click on the right arrow at "Registration"

→ Top

Interpretation of "Registrations" Information

Display of "Addresses" and registration overview:

By clicking on the line of an address and then the right arrow at "Registration" a dialog pops up, which provides informations of all registrations of the address:

→ Top

The ConfigCenter Components

The "Components" displays the state and activity of the VoIP Switch components. The components are the entities of the VoIP Switch that provide all functionality and features. The display is automatically updated every few seconds and shows the actual state and load of every component.

Note	On most VoIP Switches the "Components" display is not available for the supporters and operators.

→ Top

Navigate to "Components"

ConfigCenter:

Menu "System"

Menu "Components"

→ Top

Interpretation of "Components" Information

Display of "Components":

By clicking on the line of a component a dialog pops up, which provides more informations or enables to send messages or handle the work load of the component:

→ Top

The ConfigCenter Channels

The ConfigCenter "Channels" is a live display of the current active connections and connection build-up. The administrator can filter an search the connections. If needed a connection can be forced to be released.

Note	On most VoIP Switches the "Channels" display is not available for the supporters and operators.

→ Top

Navigate to "Channels"

ConfigCenter:

Menu "Channels"

→ Top

Interpretation of "Channels" Information

Display of "Channels":

→ Top

The ConfigCenter System Utilization

The "System Utilization" gives a statistical overview of the VoIP Switch resource utilization:

• Number of accounts
• Number of addresses (telephone numbers)
• Number of registrations
• etc

Note	On most VoIP Switches the "System Utilization" display is not available for the supporters and operators.

→ Top

Navigate to "System Utilization"

ConfigCenter:

Menu "System"

Menu "Utilization"

→ Top

Interpretation of the "System Utilization" Information

The "System Utilization" provides the numbers of used resources:

→ Top

---

© Aarenet Inc 2018

Version: 3.0     Author:  Aarenet     Date: May 2017