The Public vPBX Telephone Numbers and Direct Dialing In DDI

From help.aarenet.com
Revision as of 07:51, 25 August 2017 by Anadm (talk | contribs)
Jump to: navigation, search


Remarque Les fonctions et/ou paramètres énumérés dans cet article peuvent ne pas être disponibles auprès de votre fournisseur de services téléphoniques.



Home Feature List

 

 

Download PDF

De  Fr  En



Introduction

Here all public telephone numbers of the vPBX are listed.

For incoming calls from the public telephone network, the extension can be determined toward internal telephone numbers (Direct Dialing In DDI).

For outbound connections to the public telephone network the displayed telephone number (CLIP, CLIR) can be configured.


Remarque

Only the provider's VoIP System administrator/operator can create new or delete public telephone numbers for this vPBX.






→ Top

The Direct Dialing In DDI from a Public to an Internal vPBX Telephone Number


→ Top

The Aim of Direct Dialing In DDI

With dialing in an inbound connection toward a public telephone number is forwarded to the assigned internal vPBX telephone number.

The allocation of an internal destination is carried out either:

  • Manually within this list ( as described below)
  • Automatically, during the creation of an internal telephone number range when the intern telephone number correspond with the last digits of the public telephone number.

This procedure is described in "Internal Telephone Number of the vPBX" .


Remarque

If a public vPBX telephone number has no assigned an internal destination then incoming calls to this public vPBX telephone number are rejected.





→ Top

Preparing a Numbering Plan for the vPBX

It is recommended that for the vPBX a numbering plan is prepared. The numbering plan shows how incoming calls are to be forwarded to the internal vPBX telephone numbers.


Example of a vPBX numbering plan:

Example of a vPBX numbering plan


Based on this preparation the internal telephone numbers can be generated and the direct dialing in be configured.




→ Top

Manual Configuration of the Direct Dialing In

Configure for a public telephone number a direct dialing in destination:

  1. Click the row of the desired public telephone number
  2. A dialog box pops up, which allows to:




→ Top

Create Additional or Delete Public vPBX Telephone Numbers

Only the system administrator/operator of the provider can create new or delete public telephone numbers for this vPBX.




→ Top

Display the Telephone Number at the Called Party Side (CLIP, CLIR)

For outgoing connections via a public vPBX telephone number can be determined how the identity has to be displayed on the called side:

  • Supplied by the telephone itself or the assigned public telephone number from the internal telephone number configuration.
  • The call is displayed as anonymous (CLIR).
  • The public telephone number is displayed, which is used for the call (CLIP).


A supplied display name from the telephone itself or from the internal telephone number configuration is deleted in any case!




→ Top

Configure the Identity for Outbound Connections

Configure the identity for outgoing calls via a public telephone number:

  1. Click the row of the desired public telephone number
  2. A dialog box pops up, which allows to:
    • With parameter "Suppres own number" can be configured whether your telephone number must be displayed or not.




→ Top

Configuration


→ Top

Where to Configure this Feature

As vPBX administrator:

nav Register "Extern"




→ Top

Parameter Configuration


→ Top

Paramètre: Name

Description: Defines a name to describe the public telephone number
Configuration: Texte de configuration:
  • Any string
Valeur par défaut: None
Version: AdminCenter V5.9





→ Top

Paramètre: Internal Destination

Description: Defines to which internal telephone number of the vPBX an incoming call on this public telephone number must be forwarded.
Configuration: Menu à choix:
List of the internal telephone numbers of the vPBX
Valeur par défaut: (No Destination)
Version: AdminCenter V5.7





→ Top

Paramètre: Suppress own Number

Description: Defines which telephone number to be displayed at the called side:
  • "Do not change"
The information provided by the telephone or vPBX telephone number of the caller is transferred unchanged
  • "Yes"
The telephone number is always suppressed (CLIR).
  • "No"
The public telephone number, which is used for the call is displayed (CLIP).
Configuration: Menu à choix:
Do not change
Yes
No
Valeur par défaut: Do not change
Version: AdminCenter V5.7




→ Top


© Aarenet Inc 2018

Version: 3.0     Author:  Aarenet     Date: July 2017