Revision as of 10:25, 11 August 2017 (view source) Wikiadm (talk | contribs) ← Older edit		Revision as of 14:29, 14 August 2017 (view source) Wikiadm (talk | contribs) Newer edit →
Line 8:		Line 8:
	{{Page_Introduction_Title}}		{{Page_Introduction_Title}}
	<!-- Transclusion : Intro  Begin ------------------------------------------------------------------><section begin=intro />		<!-- Transclusion : Intro  Begin ------------------------------------------------------------------><section begin=intro />
−	Conferences calls allow multiple internal and external subscribers to participate in the same conversation.	+	Conferences allow multiple users to participate in the same conversation. Two different conference types are available:
−		+	: * Traditional Audio Conference:
−	There are two ways to organize a conference call:	+	:: The conference members join the conference via any telephone connection.
−	:* The subscribers connect via the conference portal with the needed information to the desired conference room.
−	:* The conference organizer calls up all subscribers via a "predefined conference".
−
		+	: * "UCC WebRTC" Conference:
		+	:: The "UCC WebRTC" conference provides a web browser based conferencing environment with fully encrypted audio and video conferencing, slideshow presentations, document sharing, desktop sharing etc. . Conference members without Internet access can also participate in a "UCC WebRTC" conference. However, they are limited to the audio conference.
		+	:: To organize "UCC WebRTC" conferences, the telephony system must be equipped with a "UCC WebRTC Service".
		+	Both conference types can be organized via the AdminCenter. An invitation and automatic reminders can be sent to the conference participants via e-mail. The invitation contains all the necessary information for the conference members to join the conference.
	<!-- Transclusion : Intro  End --------------------------------------------------------------------><section end=intro />		<!-- Transclusion : Intro  End --------------------------------------------------------------------><section end=intro />
Line 25:		Line 26:
	<!-- PAGE BREAK --> <!-- PDF Creation Directive --------------------------------------------------->		<!-- PAGE BREAK --> <!-- PDF Creation Directive --------------------------------------------------->
	{{PAGE_DIVERSION_FEATURE}}		{{PAGE_DIVERSION_FEATURE}}
−	{{ToTop | Feature???? }} <!------------------------------------------------------------------------>	+	{{ToTop | }} <!------------------------------------------------------------------------>
−	= Feature ????? Description  =	+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
−	FEATURE_DESCRIPTION_TEXT
Line 61:		Line 72:
	{{PAGE_DIVERSION_ENTITY}}		{{PAGE_DIVERSION_ENTITY}}
−	{{ToTop}} <!--------------------------------------------------------------------------------------->	+	{{ToTop | ConferenceCreateConference}} <!---------------------------------------------------------->
−	== Creating and Deleting a Feature ENTITY ==	+	== Creating, Modifying and Deleting a Conference ==
		+
		+	Create a new conference:
		+	# Click {{Dialog_Button | + Add }}.
		+	# A dialog pops up where the following parameters can be configured:
		+	#:* Define if it shall be [[#ConferenceType | "a simple audio or an UCC" ]] conference.
		+	#:* Define a [[#ConferenceName | "name" ]] for the conference.
		+	#:* Define a unique [[#ConferenceRoom | "room number" ]].
		+	#:* Define the date and start time [[#ConferenceStartTime | "Start"]].
		+	#:* Define the [[# ConferenceDuration | "Duration"]] in which the subscriber can dial into the conference.
		+	#:* Define a [[# ConferencePIN | "PIN"]] as the password.
		+	#:* Define an optional [[#ConferenceDescription | "Description"]] of the Conference.
		+	# For saving the configurations click the {{Dialog_Button | Save }}.
		+
		+	<br>
		+	Modify an existing conference:
		+	# Click the row of the desired conference.
		+	# Modify the desired parameter.
		+	# For saving the configurations click the {{Dialog_Button | Save }}.
		+
		+	<br>
		+	Delete a conference:
		+	# Click the waste icon {{Picture_AdminCenter_Waste}} at the end of the row of the desired conference.
		+
		+
		+
		+
		+	{{ToTop | ConferenceCreateMember}} <!-------------------------------------------------------------->
		+	== Creating, Modifying and Deleting a Conference Member ==
−	Create a new ENTITY:	+	Create a new conference member:
−	# Enter the new ENTITY name in the input field
	# Click {{Dialog_Button | + Add }}		# Click {{Dialog_Button | + Add }}
	# A dialog pops up where the following parameters can be configured:		# A dialog pops up where the following parameters can be configured:
−	#:* Define ????	+	#:* Define the information source of the [[#ConferenceMemberDestination | "conference member" ]].
		+	#:* Define the [[#ConferenceMemberName | "name" ]] of the conference member.
		+	#:* Define the [[#ConferenceMemberEmail | "email address" ]] of the conference member.
		+	#:* Define if conference member shall receive [[#ConferenceMemberSendEmail | "an invitation and remainder emails" ]].
	# For saving the configurations click the {{Dialog_Button | Save }}		# For saving the configurations click the {{Dialog_Button | Save }}
	<br>		<br>
−	Modify an existing ENTITYm:	+	Modify an existing conference member:
−	# Click the row of the desired ENTITY	+	# Click the row of the desired conference member.
−	# Modify the desired parameter	+	# Modify the desired parameter.
−	# For saving the configurations click the {{Dialog_Button | Save }}	+	# For saving the configurations click the {{Dialog_Button | Save }}.
	<br>		<br>
−	Delete a ENTITY:	+	Delete a conference member:
−	# Click the waste icon {{Picture_AdminCenter_Waste}} at the end of the row of the desired ENTITY	+	# Click the waste icon {{Picture_AdminCenter_Waste}} at the end of the row of the desired conference member.
Line 102:		Line 143:
	{{Parameter_Configuration		{{Parameter_Configuration
−	|link= ConferenceUcc	+	|link= ConferenceType
	|name= UCC Conference		|name= UCC Conference
	|description=		|description=
−	Defines wether the conference is executed on the "UCC WebRTC Conference Service".	+	Defines the type of the conference. It can be a normal audio only or a UCC conference.
		+
		+	If "UCC" is selected the conference is executed on the "UCC WebRTC Conference Service".
	|range= {{Selection_Box}}		|range= {{Selection_Box}}
	|default= Not activated		|default= Not activated
Line 119:		Line 162:
	|description=		|description=
	Defines the name of the conference.		Defines the name of the conference.
−	|range= {{Configuration_String | Random String }}	+	|range= {{Configuration_String | Any string }}
	|default= - (None)		|default= - (None)
	|version= AdminCenter V6.8		|version= AdminCenter V6.8
Line 213:		Line 256:
	|name= Destination		|name= Destination
	|description=		|description=
−	Defines the destination of the conference member. The member destination can be selected out of:	+	Defines the conference member. The member destination can be selected out of:
	:* Subscribers :		:* Subscribers :
−	:: Insert at 'Search pattern' the private telephone number of a vPBX subscriber. If a match is found the parameter [[#ConferenceMemberName | Name ]] is set automatically.	+	:: Defines a conference member from the same vPBX. The member is determined by entering the whole or part of the name of the vPBX subscriber in "Search pattern". If a member is found or selected, the further entries are supplemented if possible.
		+
	:* Phonebook :		:* Phonebook :
−	:: Insert at 'Search pattern' the name or part of a name of a vPBX phonebook entry. If a match is found the parameter [[#ConferenceMemberName | Name ]] is set automatically.	+	:: Defines a conference member from the same vPBX phonebook. The member is determined by entering the whole or part of the name in the vPBX phonebook in "Search pattern". If a member is found or selected, the further entries are supplemented if possible.
	:* Name:		:* Name:
−	:: Insert any name	+	:: Any name can be inserted.
	|range=		|range=
Line 238:		Line 282:
	|name= Name		|name= Name
	|description=		|description=
−	Defines ????	+	Defines the name of the conference member.
	|range= {{Configuration_String | Any string }}		|range= {{Configuration_String | Any string }}
	|default= - (None)		|default= - (None)
Line 251:		Line 295:
	|name= Email Address		|name= Email Address
	|description=		|description=
−	Defines the email address where an invitation and remember notifications are send.	+	Defines the email address to which the invitation and reminders will be sent.
	|range=		|range=
	{{Configuration_String | Email Address }}		{{Configuration_String | Email Address }}

---

Revision as of 14:29, 14 August 2017

Note	The features and/or parameters listed in this article may not be available from your telephone service provider.

Home Feature List

Download PDF

De  Fr  En

Introduction

Conferences allow multiple users to participate in the same conversation. Two different conference types are available:

* Traditional Audio Conference:

The conference members join the conference via any telephone connection.

* "UCC WebRTC" Conference:

The "UCC WebRTC" conference provides a web browser based conferencing environment with fully encrypted audio and video conferencing, slideshow presentations, document sharing, desktop sharing etc. . Conference members without Internet access can also participate in a "UCC WebRTC" conference. However, they are limited to the audio conference.

To organize "UCC WebRTC" conferences, the telephony system must be equipped with a "UCC WebRTC Service".

Both conference types can be organized via the AdminCenter. An invitation and automatic reminders can be sent to the conference participants via e-mail. The invitation contains all the necessary information for the conference members to join the conference.

→ Top

→ Top

Configuration

→ Top

Where to Configure this Feature

As vPBX administrator:

Tab "PBX"

Tab "Subscriber xx"

Tab "Settings"

Tab "Conferences"

As subscriber:

Tab "Settings"

Tab "Conferences"

→ Top

Creating, Modifying and Deleting a Conference

Create a new conference:

1. Click Button [ + Add ].
2. A dialog pops up where the following parameters can be configured:

   • Define if it shall be "a simple audio or an UCC" conference.
   • Define a "name" for the conference.
   • Define a unique "room number" .
   • Define the date and start time "Start".
   • Define the "Duration" in which the subscriber can dial into the conference.
   • Define a "PIN" as the password.
   • Define an optional "Description" of the Conference.

3. For saving the configurations click the Button [ Save ].

Modify an existing conference:

1. Click the row of the desired conference.
2. Modify the desired parameter.
3. For saving the configurations click the Button [ Save ].

Delete a conference:

1. Click the waste icon at the end of the row of the desired conference.

→ Top

Creating, Modifying and Deleting a Conference Member

Create a new conference member:

1. Click Button [ + Add ]
2. A dialog pops up where the following parameters can be configured:

   • Define the information source of the "conference member" .
   • Define the "name" of the conference member.
   • Define the "email address" of the conference member.
   • Define if conference member shall receive "an invitation and remainder emails" .

3. For saving the configurations click the Button [ Save ]

Modify an existing conference member:

1. Click the row of the desired conference member.
2. Modify the desired parameter.
3. For saving the configurations click the Button [ Save ].

Delete a conference member:

1. Click the waste icon at the end of the row of the desired conference member.

→ Top

Parameter Configuration

→ Top

Parameter: Organizer

Description:	Here the telephone number and name of the conference organizer is displayed.
Configuration:
Default:
Version:	AdminCenter V5.7

→ Top

Parameter: UCC Conference

Description:	Defines the type of the conference. It can be a normal audio only or a UCC conference. If "UCC" is selected the conference is executed on the "UCC WebRTC Conference Service".
Configuration:	Selection Button: Activated - Not activated
Default:	Not activated
Version:	AdminCenter V6.8

→ Top

Parameter: Name

Description:	Defines the name of the conference.
Configuration:	Configuration String: Any string
Default:	- (None)
Version:	AdminCenter V6.8

→ Top

Parameter: Room Number

Description:	Defines the number of the conference room. Note Use only digits: 0 – 9 (Letters or symbols cannot be typed on a telephone keypad.)
Configuration:	Configuration String: Random string of numbers
Default:	- (None)
Version:	AdminCenter V5.7

→ Top

Parameter: Start

Description:	Defines the date and time when the conference starts. Click in the box to define the date/time: A dialog pops up, where the date and time can be set.
Configuration:	Configuration String: DD.MM.YYYY hh:mm
Default:	Actual date and time
Version:	AdminCenter V5.7

→ Top

Parameter: Duration

Description:	Defines how long a subscriber can dial into the conference after the start time.
Configuration:	Selection Menu: Selection of the desired period of time
Default:	15min
Version:	AdminCenter V5.7

→ Top

Parameter: PIN

Description:	Defines the PIN (Personal Identification Number PIN, password) of the conference room. Note Use only digits: 0 – 9 (Letters or symbols cannot be typed on a telephone keypad.) Define enough digits
Configuration:	Configuration String: Random string of numbers
Default:	- (None)
Version:	AdminCenter V5.7

→ Top

Parameter: Description

Description:	Any description of the conference.
Configuration:	Configuration String: Any string
Default:	- (None)
Version:	AdminCenter V5.7

→ Top

Parameter: Destination

Description:	Defines the conference member. The member destination can be selected out of: Subscribers : Defines a conference member from the same vPBX. The member is determined by entering the whole or part of the name of the vPBX subscriber in "Search pattern". If a member is found or selected, the further entries are supplemented if possible. Phonebook : Defines a conference member from the same vPBX phonebook. The member is determined by entering the whole or part of the name in the vPBX phonebook in "Search pattern". If a member is found or selected, the further entries are supplemented if possible. Name: Any name can be inserted.
Configuration:	Selection Menu: Subscriber Phonebook Name
Default:	Subscriber
Version:	AdminCenter V6.8

→ Top

Parameter: Name

Description:	Defines the name of the conference member.
Configuration:	Configuration String: Any string
Default:	- (None)
Version:	AdminCenter V6.8

→ Top

Parameter: Email Address

Description:	Defines the email address to which the invitation and reminders will be sent.
Configuration:	Configuration String: Email Address
Default:	- (None)
Version:	AdminCenter V6.8

→ Top

Parameter: Send Email

Description:	Defines that the member will receive an invitation and remember email when the conference organizer initiate the email sending.
Configuration:	Selection Button: Activated - Not activated
Default:	Not activated
Version:	AdminCenter V6.8

→ Top

---

© Aarenet Inc 2018

Version: 3.0     Author:  Aarenet     Date: July 2017