Difference between revisions of "Admincenter pbx topstop"

From help.aarenet.com
Jump to: navigation, search
(Created page with "{{DISPLAYTITLE: Call Charge Monitoring and Limiting (TopStop) }} {{PAGE_HEADER}} {{Page_Menu_List_Help_AdminCenter_Feature}} <!-- FOOTER LEFT "© Aarenet AG 2017" --> <!-- PDF...")
 
Line 117: Line 117:
 
|version= AdminCenter V5.7
 
|version= AdminCenter V5.7
 
}}
 
}}
 
 
  
  
Line 130: Line 128:
 
|version= AdminCenter V5.9
 
|version= AdminCenter V5.9
 
}}
 
}}
 
 
  
  
Line 147: Line 143:
 
|version= AdminCenter V5.7
 
|version= AdminCenter V5.7
 
}}
 
}}
 
 
  
  
Line 161: Line 155:
 
|version= AdminCenter V5.7
 
|version= AdminCenter V5.7
 
}}
 
}}
 
 
  
  
Line 178: Line 170:
 
|version= AdminCenter V5.7
 
|version= AdminCenter V5.7
 
}}
 
}}
 
 
  
  
Line 192: Line 182:
 
|version= AdminCenter V5.9
 
|version= AdminCenter V5.9
 
}}
 
}}
 
 
  
  
Line 209: Line 197:
 
|version= AdminCenter V5.9
 
|version= AdminCenter V5.9
 
}}
 
}}
 
 
  
  
Line 222: Line 208:
 
|version= AdminCenter V5.9
 
|version= AdminCenter V5.9
 
}}
 
}}
 
 
  
  

Revision as of 11:23, 27 July 2017


Note The features and/or parameters listed in this article may not be available from your telephone service provider.



Home Feature List

 

 

Download PDF

De  Fr  En



Introduction

The feature "Monitoring and Limiting Call Charges (TopStop)" supervises the incurred fees of all outbound chargeable connections and block further connections if a definable limit is reached:

  • Configurable charge limit per month and / or day
  • Information by email if a defined level of monthly charge has been reached
  • Alert by email when a charge limit of the month or day has been reached





→ Top

Call Charge Monitoring and Limiting

The feature “Monitoring and Limiting Call Charges (TopStop)" allows the surveillance of the accumulated call charges. A defined limitation prevents the uncontrolled overflow of charges in case of, e.g.:

  • limited budget
  • misuse of telephone numbers or connected VoIP devices (fraud)

This feature can be set per month and / or day.

The Call charge monitoring for a given period (day, month) is as follows characterized:

  • All fees for outgoing calls since the beginning of the period are summed
  • At the beginning of a new period, the value is automatically set to 0.00
  • If the charge limit is reached, an ongoing connection automatically disconnected. New chargeable outbound connections are not possible.


Note

Emergency calls are still possible after the exceeding of a charge limit!





→ Top

Monthly Call Charge Monitoring and Limiting and Alarming

There can be set up one maximum charge limit (TopStop) per month. For a vPBX the charge limit applies to all connected subscribers. The charge limit can be increased or decreased at any time. If the limit of the current month is reached and outgoing chargeable calls are blocked then increase the limit and new calls are immediately possible again.

If an alarm email address is configured then this feature informs about of the following events:

  • The definable alarm threshold has been reached (probably the charge limit will be reached soon)
  • The limit is reached and therefore outgoing chargeable calls are blocked.




→ Top

Daily Call Charge Monitoring and Limiting and Alarming

If the “Daily TopStop” is activated and a daily maximum charge limit defined then charges are supervised on a daily basis. The behavior is equal to the monthly basis.

If an alarm email address is configured then this feature informs about the following events:

  • The limit is reached and therefore outgoing chargeable calls are blocked.




→ Top

Preventing Misuse (Fraud)

The feature "Monitoring and Limiting Call Charges (TopStop)" is highly suitable to avoid high cost in case of misuse (fraud)!

Misuse can result by:

  • the SIP Credentials of the public or internal vPBX telephone numbers were not kept secret.
  • VoIP telephones or VoIP devices were hacked. These devices are very vulnerable when connected directly to the Internet!


Note

Experience shows that if a limit is already exceeded at the beginning of the period, a misuse may have taken place or is in progress. An accurate control of the connection details CDR in the ”vPBX Call List” or “Subscriber Call List” is recommended!





→ Top

Configuration


→ Top

Where to Configure this Feature

As vPBX administrator:

nav Tab "PBX"
nav Tab "TopStop"




→ Top

Parameter Configuration


→ Top

Parameter: Current value

Description: Displays the total accrued fees since the beginning of the month.
Configuration:
Default:
Version: AdminCenter V5.7




→ Top

Parameter: Remaining amount

Description: Displays the remaining amount available until the end of the current month.
Configuration:
Default:
Version: AdminCenter V5.9




→ Top

Parameter: Max. value

Description: Defines the maximum value of the monthly limit.

The monthly limit is accumulated from the beginning of the month. At month change the value is automatically set to 0.00.

Configuration: Configuration String:
  • None : No charge limit (no charge monitoring)
  • > 0.00 : Maximum fee
Default: None
Version: AdminCenter V5.7




→ Top

Parameter: Alarmlevel

Description: Defines as a percentage of the maximum value when an email is to be sent to the specified email address.
Configuration: Selection Menu:
Selection in steps of 10%
Default: 90%
Version: AdminCenter V5.7




→ Top

Parameter: Alarm email

Description: Defines the email address to which a notification is sent when
  • the alarm level (only on the monthly monitoring)
  • the max. value

is reached.

Configuration: Configuration String:
  • Email Address
Default: None
Version: AdminCenter V5.7




→ Top

Parameter: Daily TopStop

Description: Defines whether a daily charge limit has to be monitored.
Configuration: Selection Button: box on Activated - box off Not activated
Default: Not activated
Version: AdminCenter V5.9




→ Top

Parameter: Daily max. value

Description: Defines the maximum value of the daily limit.

The daily limit is accumulated from the beginning of the day. At day change the value is automatically set to 0.00.

Configuration: Configuration String:
  • None : No charge limit (no charge monitoring)
  • > 0.00 : Maximum fee
Default: None
Version: AdminCenter V5.9




→ Top

Parameter: Daily current value

Description: Displays the total accrued fees since the beginning of the day.
Configuration:
Default:
Version: AdminCenter V5.9




→ Top

Parameter: Daily remaining amount

Description: Displays the remaining amount available until the end of the current day.
Configuration:
Default:
Version: AdminCenter V5.9




→ Top


© Aarenet Inc 2018

Version: 3.0     Author:  Aarenet     Date: July 2017